LeCroy Corporation
Exercise and Capture
118
Sierra M6
‐
2 SAS/SATA Protocol Analyzer User Manual
PHY Setting Dialog
Sierra
M6
‐
4
and
Sierra
M6
‐
2
only
: The PHY Setting & Change Speed command supports
1.5, 3, and 6 Gbps speed changing. You can run commands for different speeds, which is
especially useful for device checking. The Analyzer should support the Auto
‐
Speed mode.
Click the
...
button to display the PHY Setting dialog.
Figure 2.99: SAS: PHY Setting Dialog
Select
Speed
Negotion
Window
1
(1.5
Gbps)
or
2
(3
Gbps)
.
For SNW
‐
3 PHY Capabilities, you can select
Calculate
PARITY
bit
or not.
For Line 0, enter Start, TX SSC Type, and/or Requested Logical Link Rate.
For Line 1, enter G1 without SSC, G1 wirth SSC, G2 without SSC, G2 with SSC, G3 without
SSC, and G3 with SSC.
Inserting Instructions
Instructions are logical program elements that allow the definition of how the
Initiator Emulator program executes. Using instructions, you can define program loops,
make conditional jumps, and insert delays and stops.
To insert an instruction, click a command in the Initiator Emulator program where you
want the instruction inserted, then click the
Insert
Instruction
button, then choose the
instruction to insert.
Figure 2.100: Insert Instructions Dropdown List
