LeCroy Corporation
Creating a Sequence
358
Sierra M6
‐
2 SAS/SATA Protocol Analyzer User Manual
The Action Properties dialog box appears
1. For the action, select
Branch
to
>
New
State
.
2. Click the
OK
button to close the Action Properties dialog box.
3. This saves the action and automatically creates an area for State 1 in the scenario.
4. In the State 1 area, click the prompt to
add
an
event
. The Event Properties dialog
box appears.
5. Choose the
Address
Frame
event. In the Direction column, select
From
Target
(you
want State 1 to trigger on an Identify Address frame received from the target).
6. Click
OK
to close the Event Properties dialog box.
7. Click the prompt to
add
an
action
for State 1.
Figure 1 Example 7: Adding an Action to the Second State
The Action Properties dialog box appears.
1. In this example, you enter the action
Beep
, and you set the duration of the beep for
1 second.
2. Click
OK
to close the Action Properties dialog box.
3. You are finished creating the first sequence. Click the
add
another
sequence
prompt
to create an area in the scenario for the second sequence (Sequence 1).
