manualshive.com logo in svg

LeCroy Sierra M6-2, User Manual, Page: 449 / 480

Share
Download
LeCroy Sierra M6-2 User Manual Download Page 449

    

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

447

Find

  

  LeCroy Corporation

Find

Find

 allows searches on an open trace using one or more criteria. You can search by 

packet, transactions, split transaction, transfer, packet type, and fields within packets. 

To run 

Find

, select 

Search

 

>

 

Find

 or by click 

 on the toolbar. 

Searches can combine criteria using the options 

Intersection

 and 

Union

. 

Intersection

 creates AND statements such as “Find all packets with 

x

 and 

y.

” 

Union

 

creates OR statements such as “Find all packets with 

x

 OR 

y.

”

You can also perform searches in which packets or events are excluded from a trace, using 
the 

Exclusion

 option.

To perform a search: 

1. Select

 

Find...

 

under 

Search

 on the Menu Bar.

OR

Click 

 in the Toolbar.

You see the User

‐

Defined Find Events screen:

Figure 5.25:  Find Dialog

Summary of Contents for Sierra M6-2

































































































































































































































































































































































































































































































Reviews:

No comments