manualshive.com logo in svg

LeCroy Sierra M6-2, User Manual, Page: 22 / 480

Share
Download
LeCroy Sierra M6-2 User Manual Download Page 22

LeCroy Corporation

Installing Your Analyzer

20

Sierra M6-2 SAS/SATA Protocol Analyzer User Manual

Installing Your Analyzer

Software Installation

The software works on systems using the Windows® XP, Windows Vista, Windows 7, 
Windows Server 2003, and Windows Server 2008 operating systems. Windows Vista and 
Windows 7 are recommended, because they allow using more RAM memory.

Note on the Windows Vista

 

Operating System: 

If the SAS or SATA software does not 

open, right-click the 

SAS Protocol Suite

 or 

SATA Protocol Suite

 icon and select 

Properties

 

to display the Properties dialog. Select the 

Compatibility

 tab. Check to 

Run this program 

in compatibility mode for Windows XP.

1. Insert the Installation CD ROM into the CD/DVD drive

 on the host machine

.

2. The installation automatically starts setup, unless Auto Run is off. In that case, select 

the CD ROM from “My Computer” and click 

Setup

.

3. After the warning to close all other programs and before starting the installation, 

the Install component selection opens.

4. Select components for installation.
5. Click 

Next 

to complete the installation.

System restart

You must restart your computer before you can use your Analyzer software.

Error Message

If you get an error message during installation of the drivers for Window, consult your 
system administrator. Your system may allow only administrator-level users to copy such 
driver files.

Summary of Contents for Sierra M6-2

































































































































































































































































































































































































































































































Reviews:

No comments