LeCroy Corporation
Statistical Report Content
274
Sierra M6
‐
2 SAS/SATA Protocol Analyzer User Manual
%
: of total count
Figure 3.102: SATA: ATA Command Report
Time out of ATA Command Report
The Time out shows the NCQ time out. It is applicable for only NCQ commands. A
threshold can be set in the "NCQ commands Timeout Threshold", the default value is
1000
sec (the user can change it to any value). The statistical report provides a "Time
out" report based on this threshold. Any NCQ command that takes more than the given
threshold is flagged as "yes", which means that a timeout occurred for that command.
ATAPI Report
To display the ATAPI Report, click the
ATAPI
tab. The ATAPI Report displays information in
the following columns:
Command
: All, Custom, Inquiry, Mode Sense 10, Read10, Request Sense
Direction
: All, H
‐
>D, D
‐
>H, or Custom
Number
of
FIS
or
Number
of
Transport
: All, Custom, or a number
Payload
Size
: All, Custom, or a number of DWORDs
Status
: All, Custom, Check Condition, Good
Duration
: All, Custom, or time unit (accumulative)
Count
: All, Custom, or a number of occurrences
%:
of total count
Figure 3.103: SATA: ATAPI Report
