manualshive.com logo in svg

LeCroy Sierra M6-2, User Manual, Page: 208 / 480

Share
Download
LeCroy Sierra M6-2 User Manual Download Page 208

LeCroy Corporation

Switching Views

206

 

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

To choose frame types to include in the display, click the down arrow on the 

Frame

 

button on the Histogram toolbar and check frame types:

Figure 3.29:  SAS: Histogram Frames

Figure 3.30:  SAS: Histogram Frames

Hide Error Frames

Frames with errors are displayed in red. To hide error frames from the histogram, click the 

 button.

Note:

To display the error code of a protocol error, click the error icon (with the red 'x').

Pending IO Graph

The Tool menu has a Pending IO Graph command, with horizontal zoom, vertical zoom, 
click and drag zoom, graph area zoom, synchronize with trace view, fit to graph area and 
graph view. 

User Defined

You can define additional items for inclusion in the Histogram by clicking the 

button to open the User Defined dialog.

Figure 3.31:  SAS: Histogram User Defined Dialog

Summary of Contents for Sierra M6-2

































































































































































































































































































































































































































































































Reviews:

No comments