Sierra M6
‐
2 SAS/SATA Protocol Analyzer User Manual
123
Exercise and Capture
LeCroy Corporation
Sample Initiator Emulator Program (SAS only)
Figure 2.115 shows a simple completed SAS Initiator Emulator program.
Figure 2.115: SAS: Sample Initiator Emulator Program
Data Blocks
For commands requiring data blocks, click the down arrow of the
Payload
Data
drop
‐
down combo box and choose from a set of pre
‐
defined data blocks. If
you need a new data block, select
Configuration
>
Data
Block
or click the
Data
Block
icon on the tool bar to open a data block definition dialog (
See “Creating a Data Block” on
for instructions on creating data blocks).
Exercising Specific Addresses
Since more than one device can be active at any given time, you can specify specific
commands to send to an address. To assign commands to an address:
1. Click the down arrow on a
Target
SAS
Address
block in a completed
Initiator Emulator program, then choose
Find
New
Device
.
Figure 2.116: SAS: Find SAS Devices Select
Option button
Find New Device
Cursor
