
LeCroy Corporation
Target and Device Emulation
168
Sierra M6
‐
2 SAS/SATA Protocol Analyzer User Manual
Identify Errors (SAS only)
Click the
Identify
icon in the Errors window to display the Identify Error Setting dialog.
Figure 2.173: SAS: Identify Error Setting Dialog
Sending Identify Frame
Check the
Send
option button, then specify the number of Identify frames to send (and a
delay, if needed).
Not to send Identify frames, check the
Do
not
send
identify
frames
option button.
Frame Type Error
Check this to send a Frame Type error.
Frame Length Error
Check
Frame
Length
error
and enter the number of DWORDs in the corresponding text
box.
SOAF, EOAF and CRC
Check any or all and check the criteria for introduction.
Code violation and Disparity
Check either or both and specify DWORD offset and Number of DWORDs in the
corresponding text boxes.
Connection Management (SAS only)
Click the
Connection
Management
icon in the Errors window to display the Connection
Management Setting dialog.