MAINTENANCE - 19
check if the wheels are deformed, and check the tension in the spokes.
If your bike has v-brakes, your rim is a consumable part that will need to be controlled regularly. Please refer
to the supplier’s guidelines and check the braking surface regularly for wear indicators.
3- Every six months (depending on how often you ride and the type of riding)
closely inspect the frame for any tiny cracks.
check for play in the crankset.
we recommend taking your bike to a Lapierre authorized dealer for an in-depth inspection and tune-up.
4- Every year
Replace the stem and handlebars.
Replace the brake pads/callipers if necessary (this will depend on the frequency and intensity of your rides).
check for any parts that may rub against each other and cause damage.
we recommend taking your bike to a Lapierre authorized dealer for a complete revision and tune-up.
2 CLEANINg yOUR BIkE.
After your ride, wash your bike with soapy water (liquid dish soap is recommended for its ability to remove
grease without damaging the bike). Avoid using high-pressure washers if possible. If you have to use one, avoid
directing the stream directly at the joints and bearings (for full-suspension models).
dry your bike with a soft cloth in order to avoid rust and corrosion. while carefully drying your entire bike, you
will also be able to inspect all the different parts and detect any potential problems.
before storing your bike in a clean and dry place, lubricate the drivetrain parts with an appropriate product.
You can also take this time to control the brakes, see if the wheels are deformed, and check for any play.
3 WORN PARTS
Always keep an eye on component parts that receive a lot of wear and tear (especially the brakes) in order to
avoid any risks. If you have any doubts, you can check the manual from the component manufacturer or check
with your Lapierre authorized dealer. It’s better to prevent than to heal, so never wait until the last minute!
List of consumable parts:
- braking components (pads, rims)
- tires, inner tubes, rim strips
- cables and casing
- transmission parts (chain, chainwheels, cassette, bottom bracket)
- Shock struts and bushings
- full suspended frames pivot bearings.
IV - MAINTENANCE
EN
g
LIS
h
Summary of Contents for 3 FPS2 X-Control
