Lantronix EMG 8500 User Manual Download Page 288

Page: 288 / 416

14: Maintenance

EMG™ Edge Management Gateway User Guide

288

Load Firmware Via Options

Note:

Prior to firmware update, the current configuration is saved to the Local Disk

location with the name "before_MMDDYY_HHMM".

Configuration Management

HTTPS

Click

Upload File

to update the EMG firmware.

NFS Mounted Dir

Select the NFS mounted directory from the drop-down menu.

USB Port

Click to select USB port.

FTP/SFTP/TFTP

Server

The IP address or host name of the server used for obtaining updates and saving

or restoring configurations. May have up to 64 alphanumeric characters; may

include hyphens and underscores.

Path

The default path on the server for obtaining firmware update files and getting and

putting configuration save files.

Login

The userid for accessing the FTP server. May be blank.

Password /

Retype Password

The FTP user password.

Configuration

Management

From the option list, select one of the following:



No Save/Restore:

Does not save or restore a configuration.



Save Configuration:

Saves all settings to file, which can be backed up to a

location that is not on the EMG. If

Tarball Format

is checked, the

configuration will be saved in the old (insecure) compressed tar file format,

instead of the password protected zip file format.



Restore Factory Defaults:

Restores factory defaults. If you select this

option, the EMG unit reboots after you apply the update.



Restore Saved Configuration:

Returns the EMG settings to a previously

saved configuration. If you select this option, the EMG reboots after you

apply the update.

Save with Config or

Preserve with Restore



Select the

SSH Keys

checkbox to save any imported or exported SSH keys.



Select the

SSL Certificate

checkbox to save an imported certificate.



Select the

Scripts

checkbox to save any interface or batch scripts. Disabled

by default.

Preserve Configuration

after Restore

Allows the user to keep a subset of the current configuration after restoring a

configuration or resetting to factory defaults.
Select the checkbox for each part of the current configuration you want to keep,

for example, Networking, Services, or Device Ports.

Configuration Name to

Save to or Restore From

If you selected to save or restore a configuration, enter a name for the

configuration file (up to 12 characters).

Summary of Contents for EMG 8500

































































































































































































































































































































































































































Search results

Summary of Contents for EMG 8500

Reviews:

Related manuals for EMG 8500

Brands by name

Popular brands

Lantronix EMG 8500, User Manual

Search results

Summary of Contents for EMG 8500

Reviews:

Related manuals for EMG 8500

Brands by name

Popular brands