13: User Authentication
EMG™ Edge Management Gateway User Guide
266
5. Click the
Apply
button.
Note:
You must reboot the unit before your changes will take effect.
Kerberos Commands
Go to
to view CLI commands which correspond to the web page entries
described above.
Similar to RADIUS, the main function of is to perform authentication for remote access.
The EMG supports the protocol (not the older TACACS or XTACACS protocols).
The system administrator can configure the EMG unit to use to authenticate users
attempting to log in using the Web, Telnet, SSH, or the console port.
Users who are authenticated through are granted device port access through the port
permissions on this page.
All users are members of a group with associated predefined user rights. You may add
additional user rights that are not defined by the group.
Date/Time
Right to set the date and time.
Reboot & Shutdown
Right to shut down and reboot the EMG unit.
Local Users
Right to add or delete local users on the system.
Remote
Authentication
Right to assign a remote user to a user group and assign a set of rights to the user.
SSH Keys
Right to set SSH keys for authenticating users.
User Menus
Right to create a custom user menu for the CLI.
Web Access
Right to access Web-Manager.
Diagnostics &
Reports
Right to obtain diagnostic information and reports about the unit.
Firmware &
Configuration
Right to upgrade the firmware on the unit and save or restore a configuration (all
settings). Selecting this option automatically selects
Reboot & Shutdown
.
Internal Modem
Right to update internal modem settings.
Device Port
Operations
Right to control device ports.
Device Port
Configuration
Right to enter device port settings.
USB
Right to enter modem settings for USB devices and control USB storage devices.
SD Card
Right to enter settings for SD card.
RPM
Right to manage and control remote power managers.
