9: Device Ports
EMG™ Edge Management Gateway User Guide
180
Host Lists
A host list is a prioritized list of SSH, Telnet, and TCP hosts available for establishing incoming
modem connections or for the
connect direct
command on the CLI. The EMG unit cycles
through the list until it successfully connects to one.
To add a host list:
1. Click the
Devices
tab and select the
Host Lists
option. The following page displays:
Figure 9-12 Devices > Host Lists
2. Enter the following:
Note:
To clear fields in the lower part of the page, click the
Clear Host List
button.
3. To add hosts, enter the following:
Host Parameters
Host List Id
Displays after a host list is saved.
Host List Name
Enter a name for the host list.
Retry Count
Enter the number of times the EMG should attempt to retry connecting to the
host list.
Authentication
Select to require authentication when the EMG unit connects to a host.
Host
Name or IP address of the host.
