9: Device Ports
EMG™ Edge Management Gateway User Guide
185
Login/CHAP Host
The login name (for PAP authentication) or CHAP host (for CHAP authentication)
associated with this site. If a modem has sites enabled and the authentication is
successful at dial-in (for modem states dial-in, dial-back, CBCP server, dial-in &
dial-on-demand, or dial-back & dial-on-demand), and the name that was
authenticated matches the Login/CHAP Host, the site parameters will be used for
the remainder of the modem connection.
CHAP Secret/Retype
The CHAP secret associated with this site. If a modem has sites enabled and
CHAP authentication enabled, then at dial-in, if the remote server sends a name
in the CHAP challenge response that matches the CHAP host of a site, the CHAP
secret for the site will be used to authenticate the CHAP challenge response sent
by the remote server.
Authentication
The type of authentication,
PAP
or
CHAP
, for which this site is applicable. On
dial-in authentication, only sites with the authentication type that matches the
authentication type configured for the modem will be used to try to find a matching
site.
Timeout Logins
For text dial-in connections, the connection can time out after the connection is
inactive for a specified number of minutes.
Negotiate IP Address
If the EMG and the remote server should negotiate the IP addresses for each side
of the PPP connection, select Yes. Select No if the address of the EMG unit
(
Local IP
) and remote server (
Remote IP
) need to be specified.
Static Route IP
Address
The Static Route IP Address, Subnet Mask and Gateway must be configured for
dial-on-demand sites. The EMG will automatically dial-out and establish a PPP
connection when IP traffic destined for the network specified by the static route
needs to be sent.
Note:
Static Routing must be enabled on the Network - Routing page for dial-on-
demand connections.
Static Route Subnet
Mask
The subnet mask for a dial-on-demand connection.
Static Route Gateway
The gateway for a dial-on-demand connection.
Dial-out Number
The dial-out number must be specified for dial-on-demand sites. This indicates
the phone number to dial when the EMG unit needs to send IP traffic for a dial-on-
demand connection.
Dial-out Login
User ID for authentication when dialing out to a remote system, or when a remote
system requests authentication from the EMG unit when it dials in. May have up
to 32 characters. This ID is used for authenticating the EMG during the dial-out
portion of a dial-back (including CBCP server) and dial-on-demand.
Dial-out Password
Password for authentication when dialing out to a remote system, or if a remote
system requests authentication from the EMG unit when it dials in. May have up
to 64 characters
Retype Password
Re-enter password for dialing out to a remote system. May have up to 64
characters.
Dial-back Number
The phone number to dial on callback for text or PPP dial-back connections. A
site must successfully authenticate, have
Allow Dial-back
enabled and have a
Dial-back Number defined in order for the site to be used for callback.
Allow Dial-back
If enabled, the site is allowed to be used for dial-back connections.
Dial-back Delay
For dial-back and CBCP Server, the number of seconds between the dial-in and
dial-out portions of the dialing sequence.
Dial-back Retries
For dial-back and CBCP Server, the number of times the EMG unit will retry the
dial-out portion of the dialing sequence if the first attempt to dial-out fails.