Lantronix EMG 8500 User Manual Download

Page: 38 / 416

3: Installation

EMG™ Edge Management Gateway User Guide

Physical Installation

Install the EMG as a free-standing desktop unit, mounted on a wall, or mounted in an EIA-standard

19-inch rack (1U tall).
The EMG module uses convection cooling to dissipate excess heat.

To install the EMG unit:

1. If you have purchased additional I/O or Connectivity modules, install these modules.



For I/O modules, see

I/O Module Installation (on page 47)



For Connectivity modules, see

Connectivity Module Installation (on page 48)

Note:

Always remove the power cord from the unit prior to installing or removing the I/O

or Connectivity modules.

Connectivity Modules



(2) connectivity slots to support 2 connectivity modules.



One LTE/4G cellular modem



One Wi-Fi module (coming soon)

Power



Input: DC jack, 9-30 VDC (standard)



External AC (90W, 100-240V, 50/60 Hz) power supply shipped with unit



Dimensions

(L x W x H)

212.6mm [8.37”] x 167.68mm [6.60”] x 43.21mm [1.70”], 1U

Weight

1.406 kg (3.10 lbs)

Temperature



Operating: 0 to 50°C (32 to 122°F)



Storage: -20 to 80°C (-4 to 176°F)



Heat flow rate: TBD BTU per hour

Relative Humidity



Operating: 10% to 90% non-condensing



Storage: 10% to 90% non-condensing

Front USB Port



(1) port, type A, host USB 2.0 (HS, FS, LS)

Front Memory Card

(1) Secure Digital (micro SD) memory card slot supporting:



SDHC

Internal Memory

Optional:

128 GB Flash internal storage

Front DIO Port

(1) Digital IO slot with two digital inputs and one relay output (terminal block)

LED Indicators



Ethernet port (upper LED on front panel)



Connectivity (lower LED on front panel)



RJ45 Ethernet (Activity/Link)



SFP (Activity/Link)



LTE Signal Strength

Operating Atmosphere

Caution:

EQUIPMENT

IS FOR INDOOR USE

ONLY!

For use at altitudes no more than 2000 meters above sea level only.

For use in non-tropical conditions only.

Component (continued)

Description

Summary of Contents for EMG 8500

































































































































































































































































































































































































































Search results

Summary of Contents for EMG 8500

Reviews:

Related manuals for EMG 8500

Brands by name

Popular brands

Lantronix EMG 8500, User Manual

Search results

Summary of Contents for EMG 8500

Reviews:

Related manuals for EMG 8500

Brands by name

Popular brands