Lantronix EMG 8500 User Manual Download

Page: 254 / 416

13: User Authentication

EMG™ Edge Management Gateway User Guide

254

LDAP

The system administrator can configure the EMG to use LDAP to authenticate users attempting to

log in using the Web, Telnet, SSH, or the console port.
LDAP allows EMG unit users to authenticate using a wide variety of LDAP servers, such as

OpenLDAP and Microsoft Active Directory. The LDAP implementation supports LDAP servers that

do not allow anonymous queries.
Users who are authenticated through LDAP are granted device port access through the port

permissions on this page.
All LDAP users are members of a group that has predefined user rights associated with it. You can

add additional user rights that are not defined by the group.

To configure the EMG unit to use LDAP to authenticate users:

1. Click the

User Authentication

tab and select

LDAP

. The following page displays.

Summary of Contents for EMG 8500

































































































































































































































































































































































































































Search results

Summary of Contents for EMG 8500

Reviews:

Related manuals for EMG 8500

Brands by name

Popular brands

Lantronix EMG 8500, User Manual

Search results

Summary of Contents for EMG 8500

Reviews:

Related manuals for EMG 8500

Brands by name

Popular brands