9: Device Ports
EMG™ Edge Management Gateway User Guide
165
Figure 9-7 Device Ports - Power Management
3. Enter the following:
Power Management
Sequence
A series of one to ten characters that will display the Power Management menu
when connected to the device port. The default value is
Esc+P
(escape key, then
uppercase "P"). This value is specified as
\x1bP
, which is hexidecimal (
\x
)
character 27 (
1B
) followed by a
P
.
See
for notes on key sequence precedence and
behavior.
RPM
For each managed power supply, select a RPM, most likely a PDU, which has
outlets that can be individually controlled, and which provides power to the device
connected to the device port.
See
Chapter 10: Remote Power Managers
for details on managing Remote Power
Managers with EMG.
