manualshive.com logo in svg

Lanier GX5050, User Manual

Share
Download
Lanier GX5050 User Manual Download Page 177

174

Printing

Printing on Inkjet Transparency

Follow the procedure below to print on inkjet transparency.
Load inkjet transparency in tray.
Printed inkjet transparencies take some time to dry. We recommend that you remove a printed inkjet transpar-
ency from the output tray before the next inkjet transparency is delivered.
The print delivery time interval can be set longer to avoid printed inkjet transparency from sticking together due 
to print wetness.
A4/Letter size inkjet transparency is loaded in tray 1 here.

1. Lift the output tray.

2. Pull out tray 1.

Pull tray 1 completely out. Take care not to drop it.

3. Squeeze the paper guides on both sides, and then adjust them according to the paper size.

Beforehand, make sure to squeeze the front end paper guide, and then expand the guide.

Summary of Contents for GX5050
























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands