![background image](http://html1.mh-extra.com/html/lancer/bevariety-mcy-22/bevariety-mcy-22_installation-and-service-manual_3500568087.webp)
87
28-0724/02
6.12
Auger Motor Removal
Option 1:
The auger motor/gear box can
be
removed the traditional way by
disconnecting the
auger from the motor. The steps are as
follows:
1. Unplug the dispenser.
2. Remove Rue Pin from locking pin an
pull locking pin out of auger.
3. Remove wires from switch.
4. Remove lower ice chute.
5. Spread ears on chute and pull down.
6. Remove splash panel.
7. Remove agitator motor cover plate (two
screws).
8. Disconnect wire harness from auger
motor.
9. Remove auger motor retaining bracket
(four screws).
10.Pull out motor/gear box.
Reverse the steps to install a new
motor/gear box.
Note:
When reinstalling the motor, be sure to lock
the rue pin (see diagram at right), and
ensure that the shaft seal is in place.
Lock by moving bent end to opposite side
of straight end. When locked, clip will
appear as shown at right.
Option 2:
The auger motor can be
removed without entering the ice bin. This
eliminates the need to remove any ice
making equipment from the top of the
dispenser or remove ice from the bin itself.
Summary of Contents for BEVARIETY MCY-22
