![background image](http://html1.mh-extra.com/html/lancer/bevariety-mcy-22/bevariety-mcy-22_installation-and-service-manual_3500568018.webp)
18
28-0724/02
30” With MVU
30” Without MVU
2. Connect remaining syrup lines to the left side of the dispenser. On the 30” unit,
syrups 9-12 and the ambient syrups are only used if an MVU is present. Syrups
7-8 and the ambient syrups on the 22” unit are only used if an MVU is present.
1.11
CONTINUINg THE INSTALLATION
Confirm that all configurable valves are set to the correct carb/non-carb option. Refer to section
4.18 for the procedure. The configurable valves are valves 2-5 on the 22” without an MVU and
valves 3-6 on the 30” without an MVU.
1. Install tubular insulation onto the drip tray drain fitting. Insulation should sit flush
against the back of the drip tray. Insulation has a 5/8” ID with a 3/8” wall and is 3/4”
thick:
2. Extend hose to open drain.
3. Install drip tray onto base unit.
Drip Tray
Tubular Insulation
PN 88-0057
Drip Tray Drain Fitting
Summary of Contents for BEVARIETY MCY-22
