44
28-0724/02
5. Remove top screw and loosen bottom screw. Remove retainer.
6. Remove plug adjustment assembly by threading extractor tool (PN 52-1950) into the
bonnet and pulling it out. This will expose the flow control.
7. Lift up wire retainer and carefully remove valve from mounting block. If electric,
disconnect wire harness.
8. Tilt valve forward to remove spring and piston.
NOTE:
If piston is going to be reused,
use caution when handling.
9. Replace valve to mounting block and push wire retainer down. This will provide a
stable working condition.
10. To remove sleeve, use flow control extractor tool (PN 52-1950).
a.
Ensure rubber bushing is loose on handle.
b.
Push rubber bushing into sleeve.
c.
Turn clockwise to tighten bushing inside sleeve. NOTE: This will allow
sleeve to be removed or installed.
d.
Turn counterclockwise to loosen bushing inside sleeve. This will allow tool
to be removed from sleeve.
11. To replace sleeve, place sleeve on flow control extractor tool and insert in upper
body.
12. Lubricate o-ring with water (or any FDA approved lubricant) and push sleeve to
bottom.
13. Reassemble spool, spring, plug adjustment assembly, retainer and screws
14. Turn both shut offs on mounting block to the OPEN position.
15. Replace cover and tighten mounting screw.
16. Adjust water flow to correct flow rate.
17. Adjust ratio to correct setting.
18. Slide down I.D. panel.
4.9
DAILY CLEANINg
Nozzle and diffuser must be cleaned daily.
1. Remove nozzle by twisting counter clockwise and pulling down.
2. Remove diffuser by pulling down.
SLEEVE
FLOW EXTRACTOR TOOL
RUBBER BUSHING
Summary of Contents for BEVARIETY MCY-22
