LABORIE Solar Blue, Service & Installation Manual

Page: 74 / 198

© 2008
– 2020 by MMS B.V.
73

Check all devices (modules) on availability. You can use the graphic
representation in the hardware test (see § 4.4).

Test the infrared receiver and the remote control with the hardware test
(see § 4.4 and § 5.3).

Pump. The moving parts of the rotor should be checked from time to time
for freedom of movement. Open the cover and clean the pump rollers one
by one with a moisturized cloth. Check also if there is nothing around the
spindle of the roller that causes the friction (like a hair or something). Test
the pump with the hardware test (see § 4.4.2).

Test the pressure interface with the hardware test (§ 4.4.3).

Test the EMG interface with the diagnostic program (§ 4.4.4).

Perform a functional test on all investigations, available in the measurement
program. Check if the investigations starts, if the graphs and results are
printed and if the investigation data is saved.