LABORIE Solar Blue, Service & Installation Manual

Page: 32 / 198

© 2008
– 2020 by MMS B.V.
31
3.4 Register Bluetooth Devices
All Bluetooth devices must be registered in the LABORIE software. Sometimes
you need to register more than one module. You can register all Bluetooth
devices at once. The Bluetooth devices can be registered in the software, if
the Bluetooth functionality has been installed on your computer (see § 3.2).
For Bluetooth communication, you must proceed as follows:

Install one or more fresh batteries in the module, or make sure the batteries
have been charged. When the flowsensor is connected to the power supply
you do not need batteries. Otherwise you must place the four batteries in
the compartment. You have 15 minutes to register the Bluetooth devices; if
needed you can place the batteries again if time has passed.

For the Solar Blue module, p
ush the ‘Wake-up’ button on the Solar Blue
module shortly.
Figure 3.2
‘Wake-up’ button

For the Bluetooth puller: press the Unlock slider button (±2s) on the
control panel to switch on the Bluetooth functionality. The Bluetooth LED
flashes once. You have 15 minutes to register the Bluetooth puller. Press
the button again when registration fails.

Double-click the Database button .

Click the New Investigation button.

Choose Bluetooth devices from the menu.