LABORIE Solar Blue, Service & Installation Manual

Page: 54 / 198

© 2008
– 2020 by MMS B.V.
53
The LED’s may show different colors; the indication is as follows.
LED Color Indication
Status Green on
Rapid green blinking The Solar Blue module is switched on and
functions well.
Receiving RC IR signals.
Bluetooth Blue blinking
Unlit A wireless connection is established.
No wireless connection.
The Solar Blue module goes auto on/off at the start-up of the software.
4.2.6 MMS-bus receptacles
The Solar Blue module is equipped with two MMS-bus receptacles. These
receptacles can be used to connect the following modules:

Flowmeter,

Puller (wired).
The MMS-bus receptacles can only be used when the Solar Blue module is
connected to the computer via a USB cable and when the Solar Blue module
is powered by the power supply.
Figure 4.9 MMS-bus receptacles
4.2.7 Pressure connections
The Solar Blue module is equipped with four pressure inputs (Lemo-4
connectors) for microtip (solid-state) catheters, air-charged
transducers/catheters and water catheters with external pressure transducers.