LABORIE Solar Blue, Service & Installation Manual

Page: 118 / 198

Luna Wireless Module © 2008
– 2020 by MMS B.V.
117
8.3 Installation
8.3.1 Install the Luna wireless module
The Luna is supplied with a Bluetooth wireless interface for communication
with the computer. Only one BT dongle is needed to use the Bluetooth devices
(Luna module, Bluetooth flowmeter and/or Bluetooth puller).
For installation of the software with Bluetooth, see chapter 3. After installation
of the software you must register the Luna as described in § 3.4.
In the figure below you will see the back side of the Luna with its connectors.
Figure 8.2 Luna connectors
1 Lemo 3 EMG channel 4 Lemo 4 pressure channel (Pabd)
2
Lemo 3 conductance channel
5
Lemo 4 pressure channel (Pura)
3 Lemo 4 pressure channel (Pves) 6 Mini USB connector (only used for
ambulatory urodynamics)
Install the Luna as follows:

Connect the solid-state catheter(s) or T-DOC transducer(s) to the pressure
connectors [3/4/5]. Refer to § 8.3.4 for more information.

Connect the conductance plug of the solid-state catheter to connector [2].

Connect the EMG cable to connector [1]. Refer to § 8.3.5 for more
information.