LABORIE Solar Blue, Service & Installation Manual

Page: 120 / 198

Luna Wireless Module © 2008
– 2020 by MMS B.V.
119
8.3.3 Set the investigation protocol
In the protocol settings of the stationary measurement program you will find
the channel configuration by clicking on the
Connections button. The channel
names will pre-fixed by the Luna module.
The default settings are:
Pves (1) = Luna P1
Pabd (2) = Luna P2
Pura (3) = Luna P3
EMG1 = Luna EMG
Conductance1 = Luna Conductance
8.3.4 Connect the catheter
Solid state or air charged transducers with Lemo 4 plug can be connected to
the Lemo 4 inputs for measuring pressures. In case you have a catheter with
conductance rings, connect the Lemo 3 plug to the conductance input on the
Luna. The color of the air charged sensors represent the pressures as follows:
Color air charged catheter Pressure
Yellow Pves
Blue Pabd
Green Pura
The pressure sensors of the air charged catheter must be left in the
‘open’
position.