Kyocera Ci1000, Operating Instructions Manual

Page: 57 / 214

3
3-11 Setting up TCP/IP printing
Setting up TCP/IP clients for running Fiery WebTools
Fiery WebTools software comes pre-installed on the Ci1000. Fiery WebTools
include: WebSpooler, Status, WebDownloader, WebSetup, and WebLink.
When TCP/IP is enabled for the printer in Network Setup, Fiery WebTools are
immediately available to clients that:
• Are connected to a TCP/IP network with a consistent set of IP addresses, one
for the printer and one for each computer connect to the printer
• Have an Internet connection and a Java enabled Web browser.
The recommended browsers are:
• Netscape Navigator 3.04 for Macintosh computers,
• Microsoft Internet Explorer 4.0.1 or Netscape Communicator 4.0.4 for
Windows computers.
N
OTE
:
Microsoft Internet Explorer 3.x does not support the WebDownloader.
Note also that Windows NT 4.0 users must download the Windows NT 4.0 Hot
Fix dated July 7, 1997 in order to run the WebDownloader with Netscape
Communicator 4.x.
Netscape and Microsoft continue to release frequent updates to their browsers. As
support cannot be guaranteed for all versions, use the versions specified above for
best results.
To access Fiery WebTools, enter the IP address or DNS name of the Ci1000 as a
URL in the Internet browser. For more information, see p..
Printing and administering print jobs
Once the printer has been properly installed on the TCP/IP network, users should
be able to send print jobs to the Ci1000 from most applications. UNIX clients
also commonly use UNIX printing commands to print PostScript files and text
files to the printer.
For information on printing PostScript files and text files using UNIX commands
see Chapter 3 of Drivers and Utilities.