Kyocera Ci1000, Operating Instructions Manual

Page: 129 / 214

6
6-29 Viewing and changing Setup from Fiery WebSetup
PServer Setup (NDS Configuration)
In initial setup, the Ci1000 was connected to the network and an NDS directory
tree, with a Printer, a Print Server, and one or more Print Queue objects for
Ci1000 jobs was configured (see Operating Instructions). You can make any
changes to that setup through WebSetup. To modify NDS Setup you may need
permission to browse the NDS tree. If access to the Print Server is restricted, you’ll
need a login password.
Note that the terms NetWare server, Novell server, and IPX server are in common
use and are used here interchangeably to mean the server on an IPX network
running Novell NetWare networking software.
Enable NDS NDS has already been enabled. Uncheck this box only to remove NDS
support.
Change Trees... Click to open the Add NDS Tree window.
Add NDS Tree You can have only one NDS tree, so the following process is required to
change trees:
1. Select the current NDS tree and click Remove.
2. Select the new NDS tree and click Add.
Your new NDS tree selection automatically overwrites any previous
tree selection. If you change the NDS tree selection and there are
also current Bindery settings, you are alerted that they will be
deleted. If you continue with NDS Setup, you can replace Bindery
settings afterwards. To exit NDS Setup, choose
Cancel
.
3. Click OK.
The Select login user window appears.
Select Login
User 1. Select the User Login object from the display in the Select Login User
window.
2. Enter a password if necessary.
3. Click OK.
The Select print server window appears.