Kyocera Ci1000, Operating Instructions Manual

Page: 168 / 214

7
7-34 Care and Maintenance
5. Click off the Enable bidirectional support check box.
6. Click OK.
Media problems
Trouble:
Frequent paper-picking errors.
Frequent media jams.
Corrective Action:
Fan the paper or transparencies before installing them in their respective trays; this
is especially important for transparencies because they tend to stick together.
Make sure that you have loaded paper in the paper tray and transparencies in the
transparency tray.
Make sure that the media is installed under the hooks at the front of the media
tray.
If printing on transparencies and your printer has a 2nd Cassette Feeder, make
sure that the transparency tray is installed in the upper or middle tray slot.
Clean the paper-pick rollers (see page 7-1for directions).
Make sure that you use a high-quality laser paper: 60-105 g/m
2
(16-28 lbs.) paper
in the media trays and 75-165 g/m
2
(20-44 lbs.) paper in the multi-purpose tray.
If you are using media that is 105 g/m
2
(28 lbs.), check if the Face Down media
output setting is selected in the driver. If it is, change the setting to Face Up.
Use only recommended transparencies (see page A-4). We cannot guarantee the
results of other transparencies.