Kyocera Ci1000, Operating Instructions Manual

Page: 49 / 214

3
3-3 Parallel cable connection
2. Turn on the printer and then the computer.
Token Ring network connections
The printer supports the following type of Token Ring connection:
• Unshielded twisted pair (Category 5 unshielded twisted pair cable or
100BaseTX) cable that plugs into the UTP socket on the printer.
• Shielded twisted pair (STP) cable that plugs into the DB 9-pin connector on
the printer.
T
O CONNECT
UTP (
UNSHIELDED TWISTED PAIR
)
CABLE TO THE PRINTER
:
•
With the printer turned off, connect the cable from the Token Ring MAU (Media
Attachment Unit) to the Token Ring card.
N
OTE
:
A Media Attachment Unit (MAU) is a network hub for a Token Ring
Network.
STP (
SHIELDED
T
WISTED
P
AIR
)
CABLE TO THE PRINTER
:
•
With the printer turned off, connect the STP cable from the Token Ring MAU to
the DB-9 STP connector on the Token Ring card.
Parallel cable connection
In addition to receiving print jobs over the network, the printer can accept print
jobs directly from an IBM compatible computer through its high-speed,
Centronics compatible parallel port. This connection is also advantageous for
workstations on dedicated networks using protocols other than AppleTalk, TCP/
IP, or IPX.
Parallel port
DB-9 connector for
STP cable
RJ type connector for
UTP cable