Kyocera Ci1000, Operating Instructions Manual

Page: 105 / 214

6
6-5 I/O Port Setup
COVER PAGE
YES/NO [NO]
Use this option to specify whether a Cover (job summary) page will be printed at
the end of each print job. Select
YES
to print a page with the name of the user who
sent the job, the document name, the number of pages printed, and the status of
the job.
If a PostScript error occurred and
PRINT TO PS ERR
is set to
YES
, the error message
will be printed on the Cover page, along with the job status.
N
OTE
:
VisualCal and Color Adjustment screens, which appear next in the
sequence of screens, are described in Drivers and Utilities.
I/O Port Setup
The I/O Port Setup menus allow you to specify and set up the printer port type,
including: Ethernet, Token Ring (if an optional Token Ring card is installed), or
parallel port.
N
OTE
:
VisualCal color calibration and Color Adjustment screens are described in
Chapter 1 of the User’s Reference.
I/O PORT
SETUP
To advance to the next screen, press Enter.
Ethernet Setup
ENABLE ETHERNET
OFF/ON [ON]
Select
ON
to enable Ethernet network communication.
ETHERNET SPEED
AUTODETECT/1O TWISTED PAIR/10 AUI/10 AUTO/100 [AUTO DETECT]
Select
AUTODETECT
to automatically detect the speed at which data can be
transferred over the Ethernet network, or optionally specify the speed and cabling
of your Ethernet network.