Kyocera Ci1000, Operating Instructions Manual

Page: 117 / 214

6
6-17 Network Service Setup
Polling interval
POLL INT. (SEC)
1-999 [15]
Use the up and down arrow buttons to specify the interval, in seconds, at which
the printer communicates with the Novell server.
N
OTE
:
If you select a short interval, the amount of network traffic increases; this
may slow down other network jobs.
SMB Setup
Server Message Block (SMB) is a point-to-point, file sharing and printing
protocol, and the default printing method of most Windows applications. SMB
runs on top of TCP/IP and does not require IPX. When file and printer sharing
for Microsoft clients is enabled, SMB can be run on Windows 3.x, Windows 95,
and Windows NT.
For information on setting up SMB printing from your computer, see Chapter 3.
ENABLE SMB
YES/NO [NO]
Use this option to enable network communication using SMB.
USE NAME SERVER?
YES/NO [NO]
Select
YES
to designate a specific WINS (Windows Internet Name Server) server as
an SMB server. You will then be prompted to enter this server’s IP address.
NAME SERVER IP
[127.000.000.001]
Use the arrow buttons to enter the IP address of the WINS server you wish to use.
SERVER NAME
Use the arrow buttons to enter a name for the printer (SMB server).