Kyocera Ci1000, Operating Instructions Manual

Page: 110 / 214

6
6-10 Setup from the Control Panel and WebSetup
APPLETALK ZONE
Use the arrow buttons to select the AppleTalk zone in which you want the printer
to appear. If you do not select a zone, the printer is assigned to the default
AppleTalk zone. If your network does not have zones, this option does not appear.
Novell Setup
ENABLE NOVELL
YES/NO [NO]
Select
YES
if you have an IPX (Novell) network connected to the printer. You can
enable AppleTalk, TCP/IP, and IPX (Novell) communication simultaneously.
The following seven options appear only if you selected
YES
for
ENABLE NOVELL
. If
you select
NO
, pressing Enter returns you to the Network Protocol setup screen.
N
OTE
:
On the LCD and in the descriptive text, the terms IPX, IPX (Novell), and
NetWare are used somewhat interchangeably. In fact, IPX refers to the network
protocol, NetWare to the network operating system software that uses IPX
protocols; Novell has created and trademarked this network operating system.
For more information on setting up Novell printing see “Setting up IPX (Novell)
printing” on page 3-12.
Novell Frame Types
The next screens enable you to select the Ethernet frame type used for
communication between your NetWare file server (or NetWare file servers if you
connect to more than one) and the printer.
N
OTE
:
You cannot use the Ethernet and Token Ring network protocols at the same
time. If you have selected multiple frame types, you will only be able to use those
frame types after you have connected to the NetWare server. This means that even
if you have select bother Ethernet and Token Ring frame types, you will only be
able to use one of the frame types. You will not be able to use another network
protocol unless there is a router between the two networks.
ETHERNET 802.2
YES/NO [NO]
Select
YES
to enable Ethernet 802.2.