Kyocera Ci1000, Operating Instructions Manual

Page: 3 / 214

i General
(FCC) and Safety Information
General
Warning
• To prevent fire or shock hazard, do not expose this product to rain or any type
of moisture.
Caution
• Do not open covers and do not attempt to repair the unit yourself. Refer
servicing to qualified personnel.
Power source
Warning
• The power source voltage of this unit is listed on the nameplate. Only plug the
unit into an outlet with the proper voltage.When you operate this equipment,
the outlet should be near the equipment and accessible.
• To ensure safe operation the AC cord supplied must be inserted into standard
three-prong AC outlet which is effectively grounded (earthed) through the
normal wiring.
• The fact that the equipment operates satisfactorily does not imply that the
power point is grounded(earthed) and that the installation is completely safe.
For your safety, if in any doubt about the effective grounding (earthing) of the
power point, consult a qualified electrician.
• If the plug cannot be inserted into the AC outlet, contact a licensed electrician
to replace the outlet with a properly grounded (earthed) one. Do not defeat the
purpose of the grounding (earthing) plug (ex. do not use a conversion plug).
Laser safety
Caution
• This printer utilizes a laser. Use of controls or adjustments or performance of
procedures other than those specified here may result in hazardous radiation
exposure.
For Your
Safety