Kyocera Ci1000, Operating Instructions Manual

Page: 33 / 214

2
2-7 Setting up the printer
N
OTE
:
To optimize your printer’s performance, always use clean, unused media.
Be careful not to leave fingerprints on the media, which can result in a smudged
print.
Reusing media that has been fed through the printer once (for example, after
jams) can reduce the life of the consumables and paper path components.
The recommended transparency is 3M CG3700. If the print quality is poor, try
printing on the other side.
5. Place the media in the tray under the hooks. The height of media should not
exceed the limit mark on the tray, or it may cause a jam.
N
OTE
:
Load media with the print side down. Most media has instructions
recommending the side to be printed first.
Do not mix different types or thicknesses of media in the media tray at one time;
this may cause a jam.
6. Slide the media tray completely into the slot.
Connecting the printer to a computer
Only one PC compatible computer can be directly connected to your printer.