Kyocera Ci1000, Operating Instructions Manual

Page: 109 / 214

6
6-9 Network Protocol Setup
TR SUBNET MASK
[255.255.255.000]
This option lets you modify the subnet mask for printing with TCP/IP over
Token Ring. The subnet mask is set to
255.255.255.0 by default. If you set the IP
address and you need to set the subnet mask, enter one of the following values:
•
255.000.000.000
—if the IP address starts with a number less than 128
•
255.255.000.000
—if the IP address starts with a number from 128 through 191
•
255.255.255.000
—If the IP address starts with a number greater than 191
Be sure to confirm the subnet mask setting with your network administrator
before proceeding. In some cases the required setting may be different from those
listed.
N
OTE
:
The following option appears if TCP/IP Ethernet or TCP/IP Token Ring is
enabled.
GATEWAY ADDRESS
[127.000.000.001]
Use this option to specify the gateway address for printing with TCP/IP. By
default, no gateway address is set. If your TCP/IP network has a gateway and
you plan to print using TCP/IP, you must enter the gateway address.
The gateway address applies to either a Token Ring or an Ethernet network. If
TCP/IP is running on both an Ethernet and a Token Ring network, the gateway
address you enter must be in the same subnet as either the Ethernet or the Token
Ring address.
N
OTE
:
When the printer’s TCP/IP address, gateway, or subnet values are changed
the printer automatically restarts when Setup is exited, in order to initialize the
new values.
AppleTalk Setup
ENABLE APPLETALK
YES/NO [NO]
Select
YES
if you have an AppleTalk network connected to the printer. You can
enable AppleTalk, TCP/IP, and IPX (Novell) communication simultaneously.
N
OTE
:
The following option is displayed only if
ENABLE APPLETALK
is set to
YES
.