KUNBUS-COM EtherCAT
131 / 135
4.9 Emergency Menu
In the unlikely event of a serious error, you can open this menu.
– You can try to start the module by entering
"R"
.
– You can reset the EEPROM to the factory settings with the
"F"
key.
This can be useful, for example, if a permanently stored value triggers a
serious software error after a firmware update.
If the error cannot be remedied, please contact our support. Have the
number of the error entry ready for this purpose.
--------------------------------------------------
KUNBUS-COM - Fatal Error Handler
--------------------------------------------------
A severe error occurred. Error Stack:
Entry 0: = 0x34030000
Entry 1: = 0x00000000
Entry 2: = 0x00000000
Entry 3: = 0x00000000
--------------------------------------------------
press 'R' for Reset or
press 'F' for Reset with Factory Defaults
--------------------------------------------------
>
Also see about this
2
Synchronous serial interface [
}
32]
2
General Device Parameters [
}
60]
CDI
