KUNBUS-COM EtherCAT
111 / 135
Production valid time
In this menu you have the option,to determine the validity period of
the register contents to be read out.
The value range of the validity periods can be defined between 0 and
255 ms.
If no new data from the producer should arrive in the input registers
within the predefined period, the Data Broker uses the data set
among the default values.
--------------------------------------------------
KUNBUS-
COM
– Production valid time (0 = disabled)
--------------------------------------------------
>
2.11 EtherCAT Settings
In the following menu items, you have the option to make field-
specific settings for the Station Alias and Device ID.
--------------------------------------------------
KUNBUS-IC - EtherCAT Settings
--------------------------------------------------
Actual Station Alias Source: EtherCAT Master
Actual Explicit Device ID Source: Modbus Register
1 - Station Alias Settings
2 - Explicid Device Id Settings
--------------------------------------------------
>
2.11.1 Station Alias Settings
In this menu you can select how the module should get the Station
Alias:
– Modbus Register: The module gets the Station Alias via the storage
register.
– Switch attached to shift register: The module gets the Station Alias via
the shift chain.
– Address Setting from EtherCAT Master: The module gets the Station
Alias from the EtherCAT Master.
Using the selection [9] + [Return] you can make adjustments to the
configuration source.
--------------------------------------------------
KUNBUS-IC - EtherCAT Alias Settings
--------------------------------------------------
Actual Station Alias Source: Shift register
1 - Modbus Register
2 - Switch attached to shift register
3 - Address Setting from EtherCAT master
9 - Configure Actual Selection
--------------------------------------------------
>
CDI
