KUNBUS-COM EtherCAT
45 / 135
5 Commissioning
5.1 Installation
To connect the module directly to the control board, proceed as
follows:
ü
Attach suitable spacer bolts on the control board. Each module has
three identical holes for spacer bolts. These bolts stabilise the module
with a direct connection onto the control board.
◦ Fasten the module "head first" to the application contact strip of the
control board. The spacer bolts must be on the corresponding holes in
the board and the module kept parallel at a distance to the control
board.
◦ Fasten the module by screwing down the spacer bolts to the module
board
ð
You have successfully integrated your application and can now
configure it.
Also see about this
2
Spacer bolt [
}
9]
Commissioning
