Erreur ! Style non défini.
Erreur ! Style non défini.
11
•
Before starting the spreader, make sure that there is no-one within the dan-
ger area around the machine. Make sure you have a good view all round
and keep a special watch out for children!
•
Only start up the spreader when all safety devices and guards have been
properly fitted (e.g. pto guards and disc shrouds).
Danger from fast moving spreading material!
Fast moving spreading material can lead to serious injury (e.g. eye injuries).
•
Before engaging the pto drive/spreading discs, make sure no-one is within
the spreading zone around the spreader!
•
Never leave the spreader running unattended.
•
It is illegal and dangerous to carry passengers when using or transporting
the spreader.
•
Do not use any parts of the fertiliser spreader as a step (e.g. disc, rear rail
guard).
•
Before leaving the tractor seat, lower the spreader to the ground, switch the
tractor off and remove the ignition key. With single acting hydraulic shutter
operations, close the hydraulic shut-off valve.
•
Parking the fertiliser spreader when it is not attached to the tractor: only with
an empty hopper and on firm, level ground.
•
Never allow anyone to enter the space between the tractor and spreader
without first making sure that the tractor is prevented from moving by means
of a parking brake and/or wheel chocks!
•
Before attaching or removing the spreader from the tractor 3-point linkage,
make sure that the operating system is positioned so that inadvertent lowe-
ring or raising of the linkage is impossible.
•
It is recommended that the condition of the spreader is checked by a re-
commended dealer at the end of every season. Especially disc vanes, fi-
xings and hydraulic parts.
•
In the event of a failure during operation, switch off the spreader immediate-
ly. Stop engine and remove the ignition key before checking and repairing
the damage.
•
Ill advised choice or use of fertiliser or other spreading material can cause
serious damage to people, animals, plants and the environment. Choose
the correct material for your application. Handle with care and carefully fol-
low the manufacturer's instructions. Wear protective clothes and a protecti-
ve breathing mask.
•
Respect all recommended service periods as well as any inspection or test
recommendations to be carried out from time to time, which are given in
the operator manual.
•
Before any cleaning, servicing or repair work, relieve all hydraulic pressure,
disengage the pto drive, switch off the engine and remove the ignition key.
Detach unit from the tractor.
•
Only commence cleaning, servicing or repair work when the unit is on firm
level ground and is prevented from moving or jack-knifing (parking
legs/rollers).
WARNING
