Erreur ! Style non défini.
Erreur ! Style non défini.
18
Check for any transport damage or any missing parts. Claims can only be ac-
cepted if notification is made at time of delivery. Ask the haulier to acknowledge
any transport damage. In case of doubt, contact your dealer or the manufactu-
rer direct.
5.2 Assembly of the MDS 55-935 fertiliser spreader
To reduce the transport volume, hopper and carrying frames are packed sepa-
rately.
Use a fork-lift truck or front-end loader with suitable slings to unload the hopper
(see photo below).
Likewise, use a fork-lift truck or front-end loader with suitable slings to unload
the frame.
Both hopper and frame have a serial number printed on the right-hand side,
when viewed in the direction of travel. Numbers on both the frame and hopper
must be matched when assembling (see photo, section 3.2).
5.3 Assembly of the MDS 55 M / 65 M /
85 M / 735 M / 935 M fertiliser spreaders
Close the metering slide and place the hopper carefully on the frame. Bolt the
frame and hopper together (see photos 1 and 2, section 5.5).
