Erreur ! Style non défini.
Erreur ! Style non défini.
17
Empty weight data is given on the fertiliser spreader serial number plate.
The weight of the fertiliser spreader when empty, varies according to equipment
fitted. The weight indicated on the serial number plate applies to the most
commonly used specification. It can, however, be higher or lower.
Hopper exten-
sion kit for MDS
65 / 85
Hopper size
approx. cm
Filling
height
approx. cm
Filing
width
approx.
cm
Additional
hopper ca-
pacity ap-
prox. litres
Extension
kit weight
approx.
Kg
M 20
112,5 130 +200 +19
M 40
124,5
130 +400 +28
Hopper exten-
sion kit for MDS
735 / 935
Hopper size
approx. cm
Filling
height
approx. cm
Filling
width
approx.
cm
Additional
hopper ca-
pacity ap-
prox. litres
Extension
kit weight
approx.
Kg
M 223
190x120
+ 0
180
+ 200
+ 20
M 420
190x120
+ 18
180
+ 400
+ 30
M 423
190x120
+ 8,5
180
+ 400
+ 30
M 650
190x120
+ 30
180
+ 600
+ 40
M 653
240x120
+ 16
230
+ 600
+ 40
M 863
240x120
+ 26
230
+ 850
+ 50
5 Preparation of the fertiliser spreader
5.1 Taking delivery of the fertiliser spreader
When the fertiliser spreader is delivered, please check that it is complete.
The following items are included as standard equipment:
•
Operator manual / spreading charts
•
Calibration
kit
•
Agitator
•
Top and bottom 3-point linkage pins
•
Set of spreading discs with adjusting lever
•
Pto shaft, including pto instruction book
Also carefully check all ordered optional equipment
IMPORTANT
Check all nuts and bolts
•
Check all nuts and bolts and other fixings for tightness, especially those of the
spreading discs and spreading vanes!
Positioning of the spreading discs on their hubs
•
When positioning the spreading discs on their hubs, do not invert the spreading
disc (L) and spreading disc (R)!
•
Place the spreading discs carefully onto their hubs with the right-hand disc (R)
on the right-hand side and the left-hand disc (L) on the left-hand side, when
viewed in direction of travel.
A
TTENTION