Erreur ! Style non défini.
Erreur ! Style non défini.
57
DANGER
Injury hazard from rotating machine elements!
If the extension vanes are assembled using the previously used bolts, the extension
vane could detach itself, causing injury or death.
•
With every re-assembly
only
use new bolts, nuts and washers delivered together
with the vane. Discard the
old
bolts, nuts and washers.
2. Bolt the new extension vane (7) with the main vane (6) onto the spreading disc using
new
bolt (5)
new
self-locking nut (8) and
new
washer (12). (Before assembly, smear all bolt threads (M8 and
greater) with anti-seizure paste!)
3. Tighten the bolt so that it lies flat and secure with the spreading disc.
4. To allow the extension vane to be easily adjusted, release the bolt by approx. half a turn.
The bolt must only be released enough to allow extension vane adjustment, but ensuring at the
same time that it lies securely on the main vane. Retighten after adjustment is completed.
5. Repeat the above procedure for all other extension vanes that are to be replaced.
6. Re-assemble both spreading discs. See section 9.5 "
Refitting the spreading discs".
5
12
5
6
7
12
8
