Erreur ! Style non défini.
Erreur ! Style non défini.
36
Slot the adjusting lever into the leaf spring under the disc and press downwards
to disengage the notch pin (2).
Adjust vane angle and length and re-engage the notch pin.
Engaging the disc vanes and replacing the adjusting lever
Serious injury hazard from incorrectly attached components.
•
After adjusting the vanes, the notch pin must be completely returned into its
locked position.
•
The adjusting lever must be securely reclipped into place on the frame befo-
re the pto drive is engaged.
WARNING
The left spring should only be pressed down just enough to disengage the
notch stop.
Over tensioning of the leaf spring will result in loss of necessary tension to safe-
ly secure the disc vane.
Check leaf spring tension regularly!!
If tension is too weak it means the
notch stop is not fully engaged and the leaf spring should be immediately repla-
ced for security reasons.
WARNING