Erreur ! Style non défini.
Erreur ! Style non défini.
53
•
Place a Ø 28 mm lower link pin in both slide apertures (for
seed or slug
pellets
Ø 8 mm pins).
•
If it is not possible to insert the pins, or the pins have more than 1.5 mm
play (for
seed or slug pellets
more than 1 mm), the metering slides must
be adjusted.
Equal and simultaneous opening of the metering slides.
Both metering slides must open
equally and simultaneously
. If this is not the
case they must be adjusted.
8.5.2 Rebalancing the metering slides MDS 55 M / MDS 65 M
/ MDS 85 M / 735 M / 935 M
To adjust the opening of the metering slide, the knuckle joint on one side is de-
tached and turned through one revolution to increase or decrease the metering
slide opening.
Fundamentally, it is important that the metering slides open
simultaneously
and equally
.
A
TTENTION
How to do it!
