17
LIGHTING SYSTEM, INSTRUMENTS
123
Info
The seconds can only be set to zero.
If no button is actuated for 15
–
-20 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
17.4.6
Setting the wheel circumference
Condition
The motorcycle is stationary.
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Activate the additional functions. (
400315-01
Main work
–
Repeatedly press the button
briefly until
H
appears at the bottom right of the
display.
–
Press the button
for 2
–
3 seconds.
–
When
WS
flashes, press the
button briefly.
Info
The wheel circumference is displayed in millimeters.
Enlarging the wheel circumference
–
Press the button .
Reducing the wheel circumference
–
Press the button .
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
17.4.7
Viewing the lap time
Info
This function can only be opened if lap times have actually been timed.
Condition
The motorcycle is stationary.
400321-01
–
Repeatedly press the button
briefly until
LAP
appears at the bottom right of the
display.
–
Briefly press the button .
LAP 1
appears on the left side of the display.
–
The laps 1
–
10 can be viewed with the button .
–
Press and hold the button
for 3
–
5 seconds to clear the lap times.
–
Briefly press the button .
Next display mode
Info
When a signal from the wheel speed sensor arrives, the left side of the dis-
play changes back to the
SPEED
mode.
