18
ENGINE
159
303034-10
–
Mount and tighten screw
3
with the washer.
Guideline
Screw, angle lever,
exhaust control
M5
6 Nm
(4.4 lbf ft)
Loctite
®
243™
303033-10
–
Mount adjusting spring
2
with the auxiliary spring and spring insert.
303032-10
–
Position the locking cap.
–
Mount and tighten screws
1
.
Guideline
Screw, exhaust control cover
M5
6 Nm (4.4 lbf ft)
18.4.17 Checking the clutch
304690-10
–
Check pressure piece
1
for damage and wear.
» If there is damage or wear:
–
Change the pressure piece.
–
Place push rod
2
on a level surface and check for run-out.
» If there is run-out:
–
Change the push rod.
–
Check spring retainer
3
for damage and wear.
