KTM 300 EXC, Repair Manual

Page: 96 / 289

14 WHEELS
94
101386-11
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
2
.
Guideline
Screw, front wheel spindle M24x1.5 45 Nm
(33.2 lbf ft)
–
Operate the hand brake lever several times until the brake linings are lying correctly
against the brake disc.
–
Remove the motorcycle from the lift stand. ( p. 10)
–
Pull the front wheel brake and push down hard on the fork several times to align
the fork legs.
–
Tighten screws
3
.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
14.5.3 Removing the brake disc of the front brake
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 10)
–
Remove the front wheel. ( p. 93)
303561-10
Main work
–
Remove screws
1
. Take off the brake disc.
14.5.4 Installing the brake disc of the front brake
303561-10
Main work
–
Clean the contact surface of the brake disc.
–
Position the brake disc with the label facing outward. Mount and tighten screws
1
.
Guideline
Screw, front brake disc M6 14 Nm
(10.3 lbf ft) Loctite ® 243™
Finishing work
–
Install the front wheel. ( p. 93)
14.6 Rear wheel
14.6.1 Removing the rear wheel
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 10)