18
ENGINE
155
Guideline
Piston/cylinder - mounting clearance
New condition
0.050… 0.085 mm (0.00197…
0.00335 in)
Piston/cylinder - mounting clearance
Wear limit
0.10 mm (0.0039 in)
18.4.15 Checking the reed valve housing, reed valve, and intake flange
308688-10
–
Check intake flange
1
for damage and wear.
» If there is damage or wear:
–
Change the intake flange.
–
Check membrane
2
for damage and wear.
» If there is damage or wear:
–
Change the membrane.
–
Check reed valve housing for damage and wear.
» If there is damage or wear:
–
Change the reed valve housing.
18.4.16 Work on the clutch cover
Info
Remove the outer clutch cover to avoid damage.
303032-10
–
Remove screws
1
.
–
Remove the locking cap.
303033-10
–
Remove adjusting spring
2
, the auxiliary spring, and the spring insert.
