16
BRAKE SYSTEM
116
201494-12
–
Open shut-off valve
3
.
Info
Follow the operating instructions of the bleeding device.
–
Ensure that the filling pressure is correctly set at pressure gauge
A
. If necessary,
adjust the filling pressure at pressure regulator
B
.
Guideline
Filling pressure
2… 2.5 bar (29… 36 psi)
308332-10
–
Pull off protection cap
4
of the bleeder screw. Connect the hose of the bleeder
bottle.
Bleeding device (00029013100) (
–
Open bleeder screw
5
by approx. one half turn.
Info
Bleed until fresh brake fluid emerges from the bleeder bottle hose without
bubbles.
–
Tighten the bleeder screw.
–
Close shut-off valve
3
.
–
Open the bleeder screw again until brake fluid stops emerging.
Info
This prevents overfilling of the brake fluid reservoir.
–
Tighten the bleeder screw. Remove the hose of the bleeder bottle. Mount the pro-
tection cap.
–
Disconnect the bleeding device. Remove the bleeder cover.
308509-10
–
Stand the vehicle upright.
–
Add brake fluid to level
C
.
Brake fluid DOT 4 / DOT 5.1 (
–
Fit and tighten the screw cap with the membrane and O-ring.
Info
Clean up overflowed or spilt brake fluid immediately with water.
–
Check the foot brake lever for a firm pressure point.
