KTM 300 EXC, Repair Manual

Page: 91 / 289

13 MASK, FENDER
89
13.1 Removing the front fender
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 89)
602712-10
Main work
–
Remove screws
1
.
602713-10
–
Remove screws
2
. Remove the front fender.
13.2 Installing the front fender
602713-11
Main work
–
Position the front fender. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
602712-11
–
Mount and tighten screws
2
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Refit the headlight mask with the headlight. ( p. 90)
–
Check the headlight setting. ( p. 117)
13.3 Removing the headlight mask with the headlight
602762-10
–
Switch off all power consumers.
–
Remove screw
1
and take off the clamp.
–
Release rubber band
2
. Slide the headlight mask up and swing it forward.